Whipper Snapper DRIVE ARM ASY
Product by Belanger
Whipper Snapper Drive arm assembly. As of 2/95 - replaced by new style drive arm #105310 and 105311 - (#100507 is still available). This arm is used to connect the gear box to the drive rack on passenger and driver side. Included with this assembly: (1) 1BERNG077- Rod-end bearing (1) Part #507- Aluminum connector rod (1) Part # 1880 Water Lubricated Rod End Bearing and all associated hardware needed to mount drive arm to pitman arm. Used on: All style Whipper Snapper and Whip-a-Cross mitter curtains that use TIBB bearings.