Air Blade Troubleshooting
AIRBLADE™ DRYER Signature Line
Maintenance troubleshooting
| Problem |
Solution |
| Excessive shaking | • Inspect Impellers for debris in or on the fins |
| • Inspect Impellers for nicks and/or cracks | |
| • Inspect Impellers for dirt build-up | |
| • Check for loose or missing mounting bolts | |
| Motor Starter tripping | • Check all electrical connections for loose and/or arced wires |
| • Verify amp load is not higher than recommended settings and the Impeller is properly balanced | |
| • Confirm that the Ohm’s output on the motor and leads is correct |