Classic Conveyor
DURATRANS CLASSIC OVER / UNDER CONVEYOR
Maintenance Trouble Shooting
| Problem | Solution |
| Conveyor Jams | • Check for fallen objects or obstructions on all tracks |
| • Check chain tension . CAUTION: LOOSE CHAIN CAN CAUSE SERIOUS DAMAGE |
|
| • Check entrance and exit ramps for proper alignment | |
| Dollies will not come up on demand | • Check electrical circuit to 4-way solenoid valve |
| • Make sure 4-way solenoid valve is shifting | |
| • Make sure ramp and linkage are free from obstructions and not jammed | |
| • Check air pressure | |
| Operates too slow | • Make sure hydraulic power unit is the correct size |
| • Check for hydraulic leaks | |
| • Check for obstructions in hydraulic lines | |
| Slows down during operation | • Check pressure at hydraulic power unit. (normal operating pressure is 1,000 PSI [68.9 BAR]) |
| • Check motor for leaks | |
| Vehicle jumps off track | • This condition usually is due to an incorrect installation. Consult installation manual, or call your local distributor |
CAUTION: LOOSE CHAIN CAN CAUSE SERIOUS DAMAGE.