2" OD x 19" long (including bushings) polished stainless steel roller assembly complete with press in virgin plastic bushings.
note:
Longer style roller for 10' Over/Under Conveyor sections refer...
Aluminum 2"x 4" Passenger Side Tire Washer Arm. Positive stop bracket welded on brush end of arm.
Used on:
Current style Freestanding Tire washer
Combo Module Tire Washer
Style TW 9607 A&B
Passenger side aluminum lead in roller mount. note:
not used on aluminum 4 x 4 arm style Tire Washer.
Used on:
Combo Modules with Tire Washers Freestanding Tire Washer
Driver side aluminum lead in roller mount.
note:
not used on aluminum 4 x 4 arm style Tire Washer.
Used on:
Combo Modules with Tire Washers Freestanding Tire Washer
Tire Washer motor Stabilizer Weldment for Passenger Side motor. This bracket mounts directly to the hydraulic motor and prevents excessive torque from damaging coupling.
Used on:
Combo Modules wit...
Aluminum Tire Washer 2" x 4" arm
Used on:
Passenger side current style Tire Washer both free standing and mounted on the Combo Wash Module. Styles TW 9607 A&B
Aluminum Tire Washer 2" x 4" arm Driver side exit arm current style
Used on:
Driver side exit current style Tire Washer both free standing and mounted on the Combo Wash Module.
Styles TW 9607 A&B...
Aluminum Tire Washer 2" x 4" arm. Driver side Entrance current style
Used on:
Current Tire Washer both free standing and mounted on the Combo Wash Module.
Styles TW 9607 A&B
Driver Side Entrance Tire Washer Stainless Steel Guard. This Guard Protects the wheel of the vehicle between transition from Guide Roller to Brush. It has a Stainless Steel Tube welded to the leadin...
Passenger Side Entrance Tire Washer Stainless Steel Guard. This Guard Protects the wheel of the vehicle between transition from Guide Roller to Brush. It has a Stainless Steel Tube welded to the lea...
Tapped Base Pillow Block Mount Bearing for 1-3/16" diameter shaft.
note:
These bearings were not used on the 4x4 arm style Tire Washer. For this bearing reference #1BERNG693.
Used on:
Freestandi...
Four Bolt Flange Tire Washer Brush. 100% Nylon. 7" diameter x 96" long Brush Face.
note:
Brush only, does not include Spindle Shafts that bolt to the four hole pattern on brush. Reference the fol...
5/16" ID x 1/2" OD x 3/8" Long, Stainless Steel Replacement Bushing for all Cylinder Clevis' except the Top Nozzle Cylinder for all Rollover Style Dryers.
note:
For Rollover Cylinder applications ...
2" x 5" (stroke length) Brass Air Cylinder.
Used on:
Tire Washers (Retracts, Driver side only).
Entrance Section of the Over/Under Conveyor (On Demand Linkage) Style #5 -#6 manufactured after July...
2" x 8" (stroke length) Brass Air Cylinder.
Used on:
Tire Washers (Retracts Passenger side)
Wind Doors (All Styles)
Top Trak Conveyor (On Demand Linkage)
Over/Under Conveyor (On demand Linkage)
...
Print Page